How Much Does a Driveway Gate Cost in Corsicana, TX? (2026)

What actually drives the cost of a driveway gate

Five things set the price of a driveway gate: the material, the width, the style (swing or slide, single or double, flat or arched), what it hangs on, and whether it is built to the opening or bought as a kit. The gate leaf itself is often less than half the bill once posts, columns and labor are counted.

1. Material

Material moves the price more than anything except columns. Fixr’s national survey puts a manual steel or wrought iron gate at about $600–$4,000 and aluminum at $1,800–$4,100 before installation, with wood anywhere from $300 to $4,000 depending on how it is framed. A steel frame with cedar infill sits between all-wood and all-iron in cost.

2. Width

Wider gates need heavier frames, heavier hinges and bigger posts. Angi’s 2026 figures put a 16-foot gate at about $1,500–$4,000 and an 18-foot gate at $2,000–$6,000. On acreage, where the gate has to clear a stock trailer or a tractor, width is not optional, so plan for it from the start.

3. Style: swing, slide, single, double, arched

A double swing gate costs more than a single because it is two leaves, two sets of hinges and two posts carrying load. Fixr lists a manual single swing gate at $500–$3,000 and a double swing at $1,000–$4,000 in materials. Slide gates need a track or cantilever frame and room beside the drive to roll into. Arched tops take more cutting, bending and welding than a flat top, so they add shop time.

4. Posts and columns

What the gate hangs on decides whether it still swings true in five years. Steel posts set in concrete are the working standard. Stone columns look the part but are a masonry job of their own: HomeGuide puts a stone driveway pillar at $1,300–$3,000 each, up to $5,000 for solid natural stone. Two columns can cost more than the gate.

5. Custom shop-built versus a kit

A kit is cheaper up front; a custom gate fits the opening. Angi puts prepackaged gate kits at about $200–$2,500 and custom gates at about $700–$12,000. A kit has to be made to fit whatever opening you have; a custom gate is cut and welded to it, including openings that are out of square or on a slope.

Driveway gate cost breakdown

A driveway gate bill breaks into the gate, the posts or columns, the labor to set and hang it, and site work. The table pulls the published national figures for each piece so you can see where the money goes.

Driveway gate materials and styles compared

For most properties around Corsicana the choice comes down to four builds: all steel or iron, cedar on a steel frame, aluminum, or a pipe ranch gate. Here is how they compare on published price and on how they hold up in North Central Texas.

Steel and wrought iron

Steel is the default for a driveway gate that has to last. HomeGuide’s 2026 figures put a residential steel gate at $1,800–$3,200 basic, $3,200–$5,500 mid-range and $5,500–$8,500 premium. “Wrought iron” today means welded steel, which is what the same shop that builds wrought iron fence uses.

Cedar on a steel frame

Cedar infill in a welded steel frame gives the warm wood look and keeps the gate square. An all-wood gate this wide tends to sag at the latch end within a few summers. For reference, HomeGuide puts residential wood gates at $1,200–$2,500 basic and $2,500–$4,500 mid-range; the steel frame adds to that.

Aluminum

Aluminum is rust-proof and light, which is easy on hinges and openers, but it costs more than steel for the same opening. Fixr lists manual aluminum gates at $1,800–$4,100 before installation. It suits a decorative front entrance more than a working ranch gate that gets bumped by trailers.

Pipe ranch gate

A pipe or tube gate is the cheapest way to close a pasture or back entrance. A 12-foot, 6-bar tube gate was listed at $144.99 at Agri Supply when we checked. The gate is the cheap part; heavy pipe posts set deep in concrete are what keep it from dragging. Shop-welded pipe gates that match a pipe fence cost more but take far more abuse.

Single swing, double swing, slide and arched

• Single swing: one leaf, one hinge post. Fixr: $500–$3,000 manual, in materials. Best up to about 12–14 feet.
• Double swing: two leaves meeting in the middle. Fixr: $1,000–$4,000 manual. Lighter leaves, less sag, standard on wide drives.
• Slide: Fixr lists a manual single slide at $500–$1,200 and a double at $1,600–$3,000. Use it where the drive is short or climbs uphill from the gate.
• Arched: no separate survey price; arching the top adds cutting, bending and welding time to whichever style you pick.

Driveway gate cost by project size

Real projects fall into four rough tiers. The ranges below come from the published surveys cited on this page; where a tier combines two figures, the math is shown.

Tier 1: Pipe ranch gate on steel posts

A 12–16 foot pipe or tube gate on new steel posts, manual. HomeGuide puts a basic manual driveway gate at $300–$1,200. This is the back-pasture or hay-field entrance.

Tier 2: Custom steel or cedar-on-steel gate, steel posts

A 12–16 foot single or double swing gate built to the opening, hung on steel posts set in concrete. Fixr’s manual installed range is $700–$3,000; HomeGuide’s basic-to-mid steel tiers run $1,800–$5,500. Most residential drives in Corsicana fall here.

Tier 3: Iron gate between stone columns

A mid-range steel gate ($3,200–$5,500, HomeGuide) plus two stone columns ($1,300–$3,000 each) comes to roughly $5,800–$11,500 before an opener. Column lighting adds about $150–$450 per pillar (HomeGuide).

Tier 4: Full ranch entrance with archway and sign

A ranch entrance with an overhead arch, a cut-steel name or brand, and a wide gate is the top of the market. Texas Farm Credit’s Landscapes magazine put entrances at about $3,000 for a utility gate with an opener up to $75,000 or more for custom masonry and metalwork (2015 figures). A custom steel ranch sign alone runs about $900–$1,800 from one sign shop, before posts, crossbeam or concrete.

Local factors in Corsicana, Ennis and Waxahachie

Blackland Prairie clay is the reason driveway gates sag here. It swells in a wet winter and shrinks and cracks in August, and a hinge post set too shallow moves with it. A gate that drags is almost always a post problem, not a gate problem.

• Post depth: hinge posts carry the whole leaf as a lever. Deeper holes and more concrete cost more up front and are the cheapest insurance against a sagging gate.
• Wind: spring storms push on a solid cedar gate like a sail. Solid infill needs a heavier frame, hinges and a positive stop or latch than an open iron picket.
• Acreage widths: stock trailers, hay equipment and fifth-wheels need room to swing in off a county road. Angi lists 18-foot gates for RVs and agricultural equipment; a wider gate costs more but turning in from the road is the real test.
• HOA rules: newer subdivisions in Waxahachie and Ennis often limit gate height, style and color. Get the HOA approval before the gate is built.
• Property lines and Texas811: confirm the line before setting columns near the road, and call 811 before any post hole or conduit trench.
• Culverts: many rural drives cross a bar ditch; set the gate back far enough that a truck and trailer clear the road while it opens.

Aesthetic Gates builds gates for properties across Navarro and Ellis County. See custom gates in Waxahachie and custom gates in Ennis for those areas.

Hidden costs most driveway gate quotes leave out

The line items that blow a gate budget are usually the ones under the ground or added later. HomeGuide’s 2026 survey lists the most common extras:

• Site preparation and grading: $200–$1,000. A drive that slopes up from the gate stops a swing gate short.
• Old gate or fence removal: $100–$500.
• Electrical trenching for a future opener: $300–$800. Running conduit while the posts are going in is far cheaper than cutting the drive later.
• Permits: $50–$500 where required. Most rural Navarro County drives need none, but city lots may.
• Paint or powder finish: Fixr says finishing adds 10–25% to gate cost.
• Columns and lighting: stone columns $1,300–$3,000 each, lighting $150–$450 per pillar.

Adding an opener later

You can add an opener to a manual gate later, but it is cheaper if the gate is built for one. HomeGuide puts automating an existing driveway gate at $400–$5,500 for materials and professional installation, and a fully installed automatic gate at $1,600–$13,000, with most people spending about $7,000.

A gate built for an opener has a stiff frame, hinges that turn freely, a post that will not flex, and conduit under the drive. Our gate operator page covers the US Automatic and LiftMaster units, and the opener cost guide breaks down solar versus hardwired.

Mistakes that cost homeowners money

Most expensive gate mistakes are made before the first post hole is dug. These five come up again and again.

1. Hiring on price alone

The cheapest bid usually saves money on post depth, frame weight or hinges, and that is what makes a gate sag. Compare what is in the bid, not just the total.

2. Building too narrow

A gate that fits a pickup but not a pickup towing a trailer gets rebuilt. Measure for the widest thing that will ever come through, and the turn in from the road.

3. Hanging a heavy gate on light posts

A wide iron or cedar-on-steel leaf is a long lever on its hinge post. In Blackland clay, an undersized or shallow post leans within a season or two.

4. Skipping conduit

Even if the opener is two years away, conduit under the drive now costs a fraction of cutting concrete later.

5. Buying a kit for an odd opening

Kits come in standard widths and assume a square, level opening. On a sloped or out-of-square drive, the trimming and shimming can erase the savings.

How to compare driveway gate quotes

A real driveway gate quote spells out the gate, what it hangs on, and what is not included. If two bids do not list the same things, they are not comparable.

1. Gate width, height and style (single, double, slide; flat or arched).
2. Frame material and size, and infill (iron pickets, cedar, pipe).
3. Post or column material, size, hole depth and concrete.
4. Hinges, latch, drop rod and stops.
5. Finish: paint, powder coat or raw, and who touches it up.
6. Site prep, removal of the old gate, and haul-off.
7. Conduit for a future opener, if wanted.
8. Timeline: shop fabrication and hang date.

Aesthetic Gates gives a free written estimate after seeing the opening. Look through our work for gates built around Corsicana, or request an estimate.

FAQs