GATE WELDING · ATHENS
Gate Welding Repair in Athens, TX
Cracked welds, broken pickets, bent frames and rusted-through rails on steel and iron gates — cut out and rewelded on site or in our shop. We work across Athens — Lake Athens, Oakwood, Southwood and the surrounding area.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Cracked and broken welds
Ground out and rewelded, with a gusset added where it keeps cracking.
Bent frames straightened
Gates hit by a vehicle or stock straightened or rebuilt in the shop.
Pickets and ornaments replaced
Broken pickets, finials and scrollwork cut in and matched to the rest.
Rusted rails cut out
Rotted bottom rails and corners replaced with new steel, then primed and painted.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
A hinge weld cracked
The gate is hanging on the remaining weld, and it will let go if left.
Something drove into it
A bent frame usually costs far less to straighten than a new gate.
The bottom rail is rusted through
Rust starts where water sits, and the rest of the gate is often still sound.
ATHENS, TX
Gate Welding Repair in Athens: what’s different here.
Athens is the Henderson County seat, a town of about 12,900 people (2020 census) at the crossing of US-175, SH-31 and SH-19, roughly 60 miles southeast of Dallas. It calls itself the Black-Eyed Pea Capital of the World, is home to Trinity Valley Community College, and has the 1,800-acre Lake Athens on its east side, with Cedar Creek Lake to the northwest. The City of Athens requires a permit for any new or replacement fence (8-foot maximum, smooth side out along a right-of-way, and drive gates in side or rear fences need an approved drive approach and curb cut), and on Lake Athens the Athens Municipal Water Authority separately permits structures built on its shoreline property.
Gates & Operators in Athens
Inside Athens city limits a drive gate in a side or rear fence needs an approved drive approach and curb cut, so the gate width is planned around the concrete, while lake and wooded acreage properties outside town usually want a solar operator at a gate set back under the trees.
The ground
Athens sits where East Texas begins: sandy loam over dense clay subsoil, with deeper sands toward the east of the county and pines and hardwoods along the fence lines, so posts dig easily at the top but need concrete deep enough to bear on firm ground below the sand.
Homes and lots
Older bungalows and cottages near downtown, 1960s–1990s ranch houses in established subdivisions such as Southwood, lake homes on Lake Athens including the gated Oakwood community, and wooded acreage out on the county roads.
Neighborhoods we work in
- Lake Athens
- Oakwood
- Southwood
- Downtown & the courthouse square
- Trinity Valley Community College area
- US-175 corridor
- SH-19 acreage
- SH-31 toward Malakoff & Cedar Creek Lake
RELATED WORK
Often goes with this.
QUESTIONS
Gate Welding Repair — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.