GATE WELDING · ENNIS
Gate Welding Repair in Ennis, TX
Cracked welds, broken pickets, bent frames and rusted-through rails on steel and iron gates — cut out and rewelded on site or in our shop. We work across Ennis — Prairie View, Stonewyck Farms, Christian Meadows and the surrounding area.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Cracked and broken welds
Ground out and rewelded, with a gusset added where it keeps cracking.
Bent frames straightened
Gates hit by a vehicle or stock straightened or rebuilt in the shop.
Pickets and ornaments replaced
Broken pickets, finials and scrollwork cut in and matched to the rest.
Rusted rails cut out
Rotted bottom rails and corners replaced with new steel, then primed and painted.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
A hinge weld cracked
The gate is hanging on the remaining weld, and it will let go if left.
Something drove into it
A bent frame usually costs far less to straighten than a new gate.
The bottom rail is rusted through
Rust starts where water sits, and the rest of the gate is often still sound.
ENNIS, TX
Gate Welding Repair in Ennis: what’s different here.
Ennis is a railroad town of about 20,000 people (2020 census) in eastern Ellis County, 35 miles south of Dallas on I-45, founded by the Houston and Texas Central Railroad in 1871 and settled heavily by Czech and Slovak families. It is the Official Bluebonnet City of Texas and is growing, with new subdivisions on the edge of town and acre-plus homesites out in the county. The City of Ennis code FAQ says fences under 8 feet do not need a permit, but asks owners to call the Inspections Department (972-875-6442) first to confirm setbacks; HOA guidelines still apply in the newer subdivisions, and Texas811 locates are needed before any post holes.
Gates & Operators in Ennis
Out on Ennis acreage the drive gate usually sits at the road with the power up at the house, so it is often a wide double-swing or slide gate sized for a stock trailer or equipment and run by a solar operator, while gates in the newer subdivisions are closer to the house and simpler to wire.
The ground
Ennis sits on Blackland Prairie clay (the Kachina Prairie preserve in town protects a remnant of it), which swells in a wet spring and cracks open in August, so post depth and concrete matter more than the boards on top.
Homes and lots
Older frame houses on the streets around downtown, newer HOA subdivisions such as Prairie View, Stonewyck Farms and Christian Meadows, and acre-plus homesites off SH-34, US-287 and the county roads toward Lake Bardwell.
Neighborhoods we work in
- Prairie View
- Stonewyck Farms
- Christian Meadows
- The Hollow
- Older streets near downtown Ennis
- Lake Bardwell area
- SH-34 & US-287 acreage
- I-45 corridor toward Rice
RELATED WORK
Often goes with this.
QUESTIONS
Gate Welding Repair — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.