GATE CONVERSION · ENNIS
Automating an Existing Gate in Ennis, TX
Turning the manual gate you already have into an automatic one — checking the frame, hinges and posts first, then reinforcing and mounting the operator. We work across Ennis — Prairie View, Stonewyck Farms, Christian Meadows and the surrounding area.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Gate and post check
We swing it by hand, check the posts for lean and the hinges for wear before quoting.
Frame reinforcement
Mounting plates, stiffeners or a welded steel frame added where the gate is too light to take an arm.
Hinge upgrades
Worn or undersized hinges replaced with heavier ones that hold the leaf level.
Operator, power and controls
Operator mounted, solar or wired power, and remotes, keypad and safety devices set up.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
You like the gate you have
Automating it costs far less than replacing it.
It is a wood or pipe gate
Many need a stiffener or bracket before an arm can push them without twisting.
It sags or drags
An opener will not fix a sagging gate. The gate has to be fixed first.
ENNIS, TX
Automating an Existing Gate in Ennis: what’s different here.
Ennis is a railroad town of about 20,000 people (2020 census) in eastern Ellis County, 35 miles south of Dallas on I-45, founded by the Houston and Texas Central Railroad in 1871 and settled heavily by Czech and Slovak families. It is the Official Bluebonnet City of Texas and is growing, with new subdivisions on the edge of town and acre-plus homesites out in the county. The City of Ennis code FAQ says fences under 8 feet do not need a permit, but asks owners to call the Inspections Department (972-875-6442) first to confirm setbacks; HOA guidelines still apply in the newer subdivisions, and Texas811 locates are needed before any post holes.
Gates & Operators in Ennis
Out on Ennis acreage the drive gate usually sits at the road with the power up at the house, so it is often a wide double-swing or slide gate sized for a stock trailer or equipment and run by a solar operator, while gates in the newer subdivisions are closer to the house and simpler to wire.
The ground
Ennis sits on Blackland Prairie clay (the Kachina Prairie preserve in town protects a remnant of it), which swells in a wet spring and cracks open in August, so post depth and concrete matter more than the boards on top.
Homes and lots
Older frame houses on the streets around downtown, newer HOA subdivisions such as Prairie View, Stonewyck Farms and Christian Meadows, and acre-plus homesites off SH-34, US-287 and the county roads toward Lake Bardwell.
Neighborhoods we work in
- Prairie View
- Stonewyck Farms
- Christian Meadows
- The Hollow
- Older streets near downtown Ennis
- Lake Bardwell area
- SH-34 & US-287 acreage
- I-45 corridor toward Rice
RELATED WORK
Often goes with this.
QUESTIONS
Automating an Existing Gate — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.