GATE CONVERSION
Automating an Existing Gate in Corsicana, TX
You do not always need a new gate to get an automatic one. Most manual swing and slide gates can take an operator — but only if the gate is ready for it. A gate that drags, a hinge post that leans in the clay, or a thin frame with nowhere solid to mount a bracket will kill an opener fast. Because we weld gates in our own shop, we can fix what is wrong first: reset the post, replace worn hinges, add a mounting plate or a stiffener to the frame. Then the operator goes on a gate that swings freely by hand.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Gate and post check
We swing it by hand, check the posts for lean and the hinges for wear before quoting.
Frame reinforcement
Mounting plates, stiffeners or a welded steel frame added where the gate is too light to take an arm.
Hinge upgrades
Worn or undersized hinges replaced with heavier ones that hold the leaf level.
Operator, power and controls
Operator mounted, solar or wired power, and remotes, keypad and safety devices set up.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
You like the gate you have
Automating it costs far less than replacing it.
It is a wood or pipe gate
Many need a stiffener or bracket before an arm can push them without twisting.
It sags or drags
An opener will not fix a sagging gate. The gate has to be fixed first.
RELATED WORK
Often goes with this.
QUESTIONS
Automating an Existing Gate — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.