SLIDE GATE OPENERS
Slide Gate Openers in Corsicana, TX
A slide operator lives or dies on two things you cannot see from the road: the pad it sits on and the rack it drives. If the pad settles in the clay or the rack wanders along the gate, the gear skips, the motor strains and the limits drift. We pour or set the operator pad level and to depth, weld the rack straight along the frame in our shop or on site, and pick an operator rated for the gate’s full length and weight — including the long, heavy gates on shops and equipment yards.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Operator pad
A level concrete pad set beside the opening so the operator stays square to the gate.
Gear rack welded straight
Rack run true along the frame so the drive gear meshes the same at both ends.
Rolling and cantilever gates
Operators for track-riding gates and for gates that hang off rollers.
Long and heavy gates
Heavier operators for wide commercial and equipment-yard openings.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
The gate grinds or stalls
Usually a crooked rack or a settled pad rather than a bad motor.
You have a manual slide gate
Most slide gates can take an operator once the rack and pad are in.
The opening is too wide to swing
Slide gates handle wide spans and short drives that swing gates cannot.
RELATED WORK
Often goes with this.
QUESTIONS
Slide Gate Openers — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.