RANCH ENTRANCES
Ranch Entrances & Archways in Corsicana, TX
The gate is what swings. The entrance is everything that stands around it — the two columns, the beam across the top, and the name or brand cut out of steel. On acreage around Navarro County it is the one piece people see from the road, and it has to stand up to wind on a tall, open structure and clay that moves under the footings. We build the frame in our shop and set the columns deep enough that the arch is still level years from now.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Overhead archways
Pipe or square-tube columns with a straight or arched crossbeam over the drive.
Cut-steel names and brands
Ranch name, family name or brand cut from plate and welded into the arch.
Clearance for what comes through
Crossbeam height set for stock trailers, hay trucks and equipment, not just the pickup.
Wing fence to the line
Short runs of pipe or rail off each column so the entrance ties into the fence line.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
The place has no front door
A gate on a bare fence line works, but an entrance tells people they have arrived.
The old arch is leaning
A leaning column is a footing problem, and a tall structure only gets worse in the wind.
Trailers keep hitting it
An arch built too low gets clipped. We set the height for what actually uses the drive.
RELATED WORK
Often goes with this.
QUESTIONS
Ranch Entrances & Archways — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.