GATE FINISHING
Gate Painting & Powder Coating in Corsicana, TX
Texas sun takes the color out of a black gate in a few summers, and wherever the paint cracks, rust starts — first at the welds and the bottom rail. A finish only lasts as long as the prep under it, so the work is mostly getting back to clean steel: loose paint and rust taken off, bare spots primed, then a fresh coat. Paint can be done with the gate on its hinges. Powder coating is baked on, so the gate comes off and goes to a coating oven — a harder finish that is worth it on a new gate or a full restoration.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Rust and old paint removed
Wire-wheeled or blasted back to sound steel, with rusted sections repaired first.
Primer and paint on site
Rust-inhibiting primer and exterior enamel, done with the gate in place.
Powder coating
Gate removed, blasted and powder coated, then rehung.
Color matched
Matched to the fence, the trim or the operator, or a new color altogether.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
The black has gone grey
Faded, chalky paint is no longer protecting the steel.
Rust is showing at the welds
Caught early it is a refinish. Left, it becomes a weld repair.
The gate no longer matches
A new fence or a repainted house makes the old gate stand out.
RELATED WORK
Often goes with this.
QUESTIONS
Gate Painting & Powder Coating — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.