GATE HARDWARE
Gate Hinge & Hardware Replacement in Corsicana, TX
Hardware is the part of a gate that wears out on purpose. A hinge pin that has been carrying a heavy leaf for years wears oval, a store-bought latch rusts or snaps, and a drop rod that never had a sleeve in the concrete digs a hole until it stops holding. We replace the hardware with pieces sized for the gate: weld-on barrel or bearing hinges on steel gates, heavy strap hinges on wood, latches that line up and can take a padlock, and drop rods with a proper sleeve so a double gate stays shut in the wind.
SCOPE
What this service covers.
Only the work we actually do — no padded list. If you are not sure whether your job fits, send a photo and we will tell you straight.
Hinges
Weld-on barrel and ball-bearing hinges for steel gates, heavy strap and adjustable hinges for wood.
Latches and locks
Gravity latches, two-way latches and lockable hardware set to line up.
Drop rods and cane bolts
For double gates, with a sleeve set in the drive so the rod has something to hold.
Gate stops and holdbacks
Stops so the gate does not swing past, and holdbacks to keep it open in wind.
BASED IN CORSICANA, TEXAS — 32.0954° N, 96.4689° W
Why people call about this.
The hinges squeal or clunk
Worn pins and barrels let the gate shift every time it swings.
The latch will not catch
A latch that has to be held shut is a gate that gets left open.
The double gate blows open
Usually a drop rod with nothing solid to drop into.
RELATED WORK
Often goes with this.
QUESTIONS
Gate Hinge & Hardware Replacement — things people ask.
CORSICANA, TEXAS — 32.0954° N, 96.4689° W
CALL FOR A FREE ESTIMATE.
Send a few photos and the address. Cesar will come look at it and give you a straight number — free.